feature scheduler
feature scheduler
To enable the scheduler feature on a Cisco NX-OS device, use the feature scheduler command. To
disable the schedule feature, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled
Command Modes
Global configuration mode
Release
Command History
5.0(3)A1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to enable the scheduler feature on a Cisco NX-OS device:
switch# configure terminal
switch(config)# feature scheduler
This example shows how to disable the scheduler feature on a Cisco NX-OS device:
switch(config)# no feature scheduler
switch(config)#
Related Commands
Command
scheduler
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
52
feature scheduler
no feature scheduler
Modification
This command was introduced.
Description
Configures maintenance jobs.
System Management Commands
OL-27851-02