Show Startup-Config Vtp - Cisco Nexus 3548 Command Reference Manual

show startup-config vtp

show startup-config vtp
To display the VLAN Trunking Protocol (VTP) configuration from the startup configuration file, use the
show startup-config vtp command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC mode
Command History Release
5.0(3)A1(1)
Examples
This example shows how to display the VTP configuration stored in the startup configuration file:
switch# show startup-config vtp
Related Commands Command
copy running-config
startup-config
feature vtp
vtp domain
vtp file
vtp mode
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
200
show startup-config vtp
Modification
This command was introduced.
Description
Copies the running configuration to the startup configuration file.
Enables VTP on the switch.
Configures the VTP administrative domain.
Stores the VTP configuration in a file.
Configures a VTP device mode.
System Management Commands
OL-27851-02