Cisco Nexus 3548 Command Reference Manual page 46

customer-id (Call Home)
customer-id (Call Home)
To configure the optional unique identification number for the customer, use the customer-id command.
To remove a customer number, use the no form of this command.
Syntax Description
customer-no
Command Default
None
Command Modes Callhome configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines You can configure the customer identification information that Cisco Smart Call Home should use. The
service agreement includes the customer identification information, such as the customer ID, contract
ID, and site ID.
Examples
This example shows how to configure a customer number:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# customer-id AXC-1203
switch(config-callhome)#
Related Commands Command
site-id
show callhome
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
36
customer-id customer-no
no customer-id
Customer number, as specified in the service agreement. The customer
number can be up to 255 alphanumeric characters in free format.
Modification
This command was introduced.
Description
Configures the site number for the switch.
Displays a summary of the Call Home configuration.
System Management Commands
OL-27851-02