Cisco Nexus 3548 Command Reference Manual page 221

System Management Commands
Examples This example shows how to enable SNMP notifications for the server state change:
switch# configure terminal
switch(config)# snmp-server enable traps aaa
switch(config)#
This example shows how to disable all SNMP notifications:
switch# configure terminal
switch(config)# no snmp-server enable traps
switch(config)#
Related Commands Command
snmp-server enable
traps link
show snmp trap
OL-27851-02
Description
Enables the Simple Network Management Protocol (SNMP) notifications
on link traps.
Displays the SNMP notifications enabled or disabled.
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
snmp-server enable traps
211