Snmp-Server Contact - Cisco Nexus 3548 Command Reference Manual

snmp-server contact

snmp-server contact
To configure the Simple Network Management Protocol (SNMP) contact (sysContact) information, use
the snmp-server contact command. To remove the contact information, use the no form of this
command.
Syntax Description
text
Command Default
No system contact (sysContact) string is set.
Command Modes
Global configuration mode
Command History Release
5.0(3)A1(1)
Examples
This example shows how to set an SNMP contact:
switch# configure terminal
switch(config)# snmp-server contact DialSystemOperatorAtBeeper#1235
switch(config)#
This example shows how to remove an SNMP contact:
switch# configure terminal
switch(config)# no snmp-server contact DialSystemOperatorAtBeeper#1235
switch(config)#
Related Commands Command
show snmp
snmp-server location
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
206
snmp-server contact [text]
no snmp-server contact [text]
(Optional) String that describes the system contact information. The text
can be any alphanumeric string up to 32 characters and cannot contain
spaces.
Modification
This command was introduced.
Description
Displays information about SNMP.
Sets the system location string.
System Management Commands
OL-27851-02