Cisco Nexus 3548 Command Reference Manual page 70

hardware profile forwarding-mode warp
switch(config)# hardware profile forwarding-mode warp
switch(config)#
This example shows how to disable warp mode:
switch(config)# no hardware profile forwarding-mode warp
Warning: This configuration has been modified and will take effect only after sa
ving the configuration (copy r s) and reload!
switch(config)#
Related Commands Command
show hardware profile
forwarding-mode
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
60
Description
Displays the warp mode status and the host, unicast, multicast, and Layer 2
TCAM sizes.
System Management Commands
OL-27851-02