System Status Messages - Interlogix ZeroWire User Manual

WiFi
• "Connection Was lost before a response was received" – Sent when No
response received on a WiFi network change.
Data Entry Errors
• "Data must only contain the following characters"
• "Date must be of the form YYYY–MM–DD."
• "Day must be from 1 to 31"
• "Data entry must only contain the numbers 0 – 9 and A–F"
• "Data entry must only contain the numbers 0 – 9"
• "Data must be a number from X to Y"
• "Improper Time Value"
• "must be 4 to 8 digits
• "You must enter a user Number between 1 and 1048575"
• "PIN digits must be between 0 and 9"
• "PIN Must be 4–8 digits from 0–9"
• "Data must not contain the following characters []"

System Status Messages

Various messages may appear on the Status screen of ZeroWire Web Server
and UltraConnect App. These are also announced by voice when the Status
button is pressed.
System
• AC power fail – The security system has lost its electricity power. May take up
to 5 min to clear once power restored.
• Low battery – The security system's back up battery requires charging. May
take up to 5 min to clear once battery charged.
• Battery test fail – The security system's back up battery requires changing. If
after 48 hours this message does not clear, contact your service provider to
order a new battery. If the power fails, your system will not be operational.
• Box tamper – The security system's cabinet tamper input has activated.
• Siren trouble – The security system's external siren has a problem.
• Over current – The security system is drawing too much current.
• Time and date loss The security system time and date need resetting.
• Communication fault – The security system has detected a problem with the
communication channel.
70 ZeroWire User Manual