Interlogix ZeroWire User Manual page 6

You may arm your system by entering your user PIN code:
1.
2.
3.
4.
Or, if your service provider has enabled the quick arm feature, you can simply touch the
Stay key:
5.
6.
7.
If an armed zone is alarmed whilst your security system is in the Stay mode, it will sound a
warning tone on your ZeroWire and start a timer. At the end of the Stay Mode Entry Time
your sirens will sound. Your service provider predetermines this warning time at the time of
installation.
ZeroWire User Manual
Touch Stay
Ready Light
is green
STATUS
STAY
STATUS
STAY
Downstairs only
protected
Check status key is green. Close all
protected doors and windows. If you
have motion detectors outside your "stay
mode", have everyone leave those
areas.
Select the Stay Mode.
Stay within the protected areas.
Check status key is green. Close all
protected doors and windows. If you
have motion detectors outside your
"stay mode", have everyone leave
those areas.
Select the Stay Mode.
Stay within the protected Stay or Night
Mode areas.
15