Change A User Pin; Change The User Type; Add Keyfobs - Interlogix ZeroWire User Manual

Change a User PIN

Example: Change User 4 PIN code to 5555.
1.
YOUR 4 TO 8 DIGIT MASTER CODE
2.
3.
4.
5
5.
6.
MENU
Note: User must have a unique PIN code. If the new PIN code you enter is the same as
another user's PIN code your ZeroWire will announce "PIN code is occupied, select a new
user PIN code."

Change the User Type

The user type determines what that user can do:
• Master users can arm and disarm partitions. They can create, delete, or modify user
codes. They can also change system settings.
• Standard users can arm and disarm partitions. But they cannot create users or review
event history.
• Arm only users can only turn on the security system, they cannot disarm, or dismiss
any system conditions.
Example: Change user 6 to a master user to allow them to add/remove users.
1.
YOUR 4 TO 8 DIGIT MASTER CODE
2.
3.
4.
5.
6.
MENU

Add Keyfobs

Keyfobs require special programming depending on your requirements. Contact your
security provider to purchase additional keyfobs.
ZeroWire User Manual
MENU 3
ENTER
1
4 ENTER
5 5 5
ENTER
MENU MENU
MENU 3
ENTER
2
6 ENTER
2
MENU MENU
Selects User Configuration menu.
Selects configure user PIN.
Select user 4.
Sets user 4 PIN code as 5555
Exits from Advanced system configuration.
Selects User Configuration menu.
Selects configure user type.
Select user 6.
Sets master user type.
Exits from Advanced system configuration.
25