Table of Contents
Advertisement
SP 1000SF
Parameter
79 - Toner
This parameter helps you manage
Management
the consumable. When set to W
[0-10%], you can only replace the
toner cartridge when the toner has
reached the threshold.
If ever you need to replace the
toner cartridge before the toner
near end, set the parameter to
W
ITH
the toner cartridge replacement
(see chapter Maintenance, page
50).
Disabling the toner management
(parameter set to W
strongly not recommended as you
may loose faxes and spill toner in
your print mechanism. When set to
W
ITHOUT
T
ONER
80 - Toner save
Makes printing lighter to save toner
cartridge ink.
Inactivity time-out before document
91 - Timeout error
being printed is deleted following a
print error in PC print mode.
92 - Wait timeout
Wait time-out for data from PC
before the task is deleted in PC
print.
93 - Replace format
Page format change. This
parameter allows you to print a
LETTER format document on A4
pages using the LETTER/A4
setting.
Printing the functions guide
The printing is not possible on A5
Important
paper format.
1 Press on
and enter 51 with the digital keypad.
The printing of the functions guide starts.
Printing the logs
The printing is not possible on A5
Important
paper format.
The incoming and outgoing logs list the last 30
transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30
transmissions. However, you may request a print out at
any time.
Each log (incoming or outgoing) contains a table with the
following information:
Signification
[0-100%] and proceed with
) is
ITHOUT
, the screen displays
? %.
51 - PRINT / FUNCTIONS LIST
•
date and time of the incoming or outgoing document,
•
subscriber's number or E-mail address,
•
transmission mode (Normal, Fine, SFine or Photo),
ITH
•
number of pages sent or received,
•
call duration,
•
incoming or outgoing results: noted CORRECT if
properly transmitted,
or
information codes for special calls (polling, manual
subscribers, etc.)
•
reason for call error (example: your subscriber does
not answer)
To print the logs:
1 Press on
The printing of the logs starts.
The incoming and outgoing logs are printed on the same
page.
Print the list of setups
Important
To print the list of setups:
1 Press on
The printing of the list of setups starts.
Lock the machine
This function prevents non-authorized people from
accessing the machine. An access code will be required
every time someone wants to use the device. After each
use, the device will lock automatically.
Before that you have to enter a lock code.
811 - ADVANCED FCT / LOCK / LOCKING CODE
1 Press on
, enter 811 with the digital keyboard.
2 Enter your lock code (4 digits) with the keyboard,
confirm with OK.
Important
3 Enter again your lock code (4 digits) with the
keyboard, confirm with OK.
4 Quit this menu by pressing the
- 30 -
52 - PRINT / LOGS
and enter 52 with the digital keypad.
The printing is not possible on A5
paper format.
54 - PRINT / SETUP
, enter 54 with the digital keypad.
If a code is already registered, enter
the old code before typing the new
one.
button.
Advertisement
Table of Contents
