Table of Contents
Advertisement
4 Hold it by its handle.
5 Insert the cartridge in its slot by pushing it until it
clicks (last move down) as shown on the picture
below.
6 Close the cover.
Paper delivery stop
Adjust the paper delivery stop, depending on the format of
the document to be printed. Do not forget to raise the flap
to prevent the sheets from falling down.
Starting your device
Device connection
Before plugging the power cord, it is
WARNING
imperative to refer to the Security
directives, page 1.
1 Plug the end of the telephone line into the terminal
socket and the other end into the wall telephone
socket.
2 Connect the power cord to the device.
3 Make sure that the On/Off switch is off (O position).
Plug the power cord to outlet on the wall.
The power cord is used as a 230 V
power unit cut off. As a precaution,
the outlet shall be located close to
WARNING
the device and be of easy access in
case of danger.
4 Press the On/Off button to turn on the device
(I position).
5 By default, the machine is set to operate in England
and in English. To modify this parameter, refer to
Country, page 26.
6 Set the date and time, refer to Date/Time, page
- 17 -
SP 1000SF
26.
Advertisement
Table of Contents
