Cleaning The Endorser - Ricoh IS450 Operating Instructions Manual

5. Troubleshooting
I I I I I
Push the Endorser in until it clicks,
and tuck the Endorser's power cord
into the appropriate hook.
J J J J J
Slide the protrusion on the bottom of
the cover into the output table, and
then push the cover closed.
32

Cleaning the Endorser

If paper scraps and dust accumulate in the
vicinity of the printing section of the Endorser,
printing quality will be adversely affected. If
the printing section becomes dirty, gently wipe
the portion shown in white in the illustration
below with a dry, soft cloth.
Important
Do not wipe any portion other than that
which is shown in white above. In addi-
tion, do not touch the printing section.
Doing so may get your fingers dirty, and
could damage the printing section.