Dip Switches - Ricoh IS450 Operating Instructions Manual

DIP Switches

Only the settings of DIP switches 1 through 3 can be changed. Do not change the settings of the
other switches.
Important
If multiple scanners with the SCAM function enabled are connected on the same daisy
chain, the host will not be able to recognize the IDs. In this case, set DIP switch 1 to
"ON"(SCAM function disabled), and set the SCSI ID with the rotary switch.
If the daisy chain is too long, or if a nonstandard SCSI cable is used, misoperation may
occur during synchronous transfer. In this case, set DIP switch 2 to "ON" (SCSI
synchronous transfer disabled).
If this scanner is connected in the middle of a daisy chain, set DIP switch 3 to "ON"
(internal SCSI terminator off).
Leave these set to "OFF;" do not
change.
OFF: Internal SCSI terminator on
ON: Internal SCSI terminator off
OFF: SCSI synchronous transfer
enabled
ON: SCSI synchronous transfer
disabled
OFF: SCAM function enabled
ON: SCAM function disabled
DIP Switches
43