Table of Contents
Advertisement
Holsten1AE_Basic_FM.book Page 45 Monday, November 6, 2000 8:10 PM
Solutions to Common Problems
If a problem is not cleared, even after performing the Action Required, call your
service representative.
Problem
STANDBY MODE
Nothing happens when the
switch is turned on.
SET DOC. OR DIAL NO.
not displayed.
The display does not show the
Ready condition, or the machine
stops during an operation.
Required Action
Check the power cord. Is it properly plugged into the outlet?
Plug it in firmly.
Switch the power on.
is
If no characters are displayed, check that the power cord is
plugged in.
Does "
CLEAR ORIGINAL
the display?
Clear the misfed paper.
Reference
See P.38 "Clearing a Document Jam" , P.39 "Clearing a Copy,
Fax, or Print Jam" .
Does "
ADD PAPER
" appear in the display?
Load paper into the paper tray. See P.33 "Loading Paper into
the Paper Tray".
Does "
CLOSE COVER
Close the Front Unit.
Is the Add Toner indicator on?
Load a new toner cassette. See Chapter 9, "Replacing the
Toner Cartridge and Cleaning Pad" in the Advanced Fea-
tures manual.
Solutions to Common Problems
" or "
" appear in
CLEAR COPY
" appear in the display?
4
45
Advertisement
Table of Contents
