Table of Contents
Advertisement
Holsten1AE_Basic_FM.book Page 5 Monday, November 6, 2000 8:10 PM
Operation Panel
{ { { { Reception Mode} } } } key
1.
Press this to select the reception mode
(Tel, Fax or Auto).
Lights when the reception mode is Tele-
phone.
2.
Check Display indicator
The Check Disp. Indicator blinks to tell
you to read the display.
3.
Receive File indicator
The Receive File indicator lights when an
incoming message was received into
memory. (see P.36 "If an Indicator Lights
on the Operation Panel").
4.
Add Toner indicator
Blinks when toner is about to run out and
lights continuously when toner has run out.
{ { { { Resolution} } } } key
5.
The resolution/Halftone is indicated by
these three indicators and can be changed
by the resolution/Halftone. When the In-
dicator is not lit, Standard is selected.
6.
Control panel Display
The Liquid Crystal Display guides you
through tasks and informs you of the
state of the machine. Messages appear
here. The display consists of two 20-char-
acter lines.
{ { { { Speed Dial} } } } key
7.
Press the {Speed Dial} key using Speed
Dialer Feature.
8.
Arrow keys
T {Yes} accept
U {No} reject/ {Help} Print help list
W scroll left/ {Paper Size} The paper size
selection screen for Paper Tray will ap-
pear.
V scroll right/ {Option} Press to access
the options.
9.
Memory key/ indicator
When the Memory indicator is on, then
memory transmission is in effect, if it is off,
immediate transmission is in effect. Switch
between the two with the {Memory} key.
Operation Panel
1
5
Advertisement
Table of Contents
