Using The Rear Table - Ricoh FW740 Manual

Using the Rear Table

Set thick originals (0.19mm, 35µ~1mm) or originals less than 297mm in width and more than
1200mm in length, on the Rear Table.
Notes
p You cannot use the following functions using the Rear Table.
•
Repeated Copying
•
Synchro cutting function with roll paper
•
Partial Copying
1 Choose any copy setting you require.
2 For manual copying, set paper.
3 Pull up the guide to avoid reversing the original.
4 Insert the original face down on the Rear
Table.
5 When the machine scans the original and starts
copying, support the original with your hands
in front of the machine.
6 Clear/Stop key and remove the original.
18
Energy Set
Saver Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
SM051
Clear Modes/
Energy Saver
Program
Clear/Stop