Boot Menu - Intel SDS2 Product Manual

System Management Submenu
Feature
BIOS Version
Board Part Number
Board Serial Number
System Part Number
System Serial Number
Chassis Part Number
Chassis Serial Number
BMC Device ID
BMC Device Revision
BMC Firmware Revision
BMC Firmware Bootblock Revision
BMC Support IPMI Version
SDR Revision
PIA Revision
Primary HSBP Revision
Secondary HSBP Revision
Console Redirection Submenu
Feature Choices
COM Port Disabled, 3F8, 2F8, 3E8
Address
Baud Rate 9600, 19.2k, 38.4k, 57.6K, 115.2k
Flow None, CTS/RTS, XON/XOFF,
Control CTS/RTS + CD

Boot Menu

Feature
Boot Device Priority
Hard Drive
Removable Devices
Configuration Software and Utilities
Choices
Description
When enabled, console redirection uses the I/O port
specified. All keyboard/mouse and video will be
directed to this port. This is designed to be used only
under DOS in text mode.
When console redirection is enabled, specifies the baud
rate to be used.
None disallows flow control.
CTS/RTS is hardware-based flow control.
XON/XOFF is software-based flow control.
CTS/RTS + CD is hardware-based flow control plus
Carrier Detect.
When EMP is sharing the COM port as console
redirection, the flow control must be set to CTS/RTS or
CTS/RTS+CD depending on whether a modem is used.
Device Description
Enters submenu
Enters submenu
Enters submenu
Description
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
This field is information only
55