Adding Or Replacing A Processor; Raise The Locking Bar - Intel SDS2 Product Manual

Adding or Replacing a Processor

If you are adding a second processor to your system, you must first remove the terminator from the
secondary processor socket. The second processor must be compatible with the first processor
(within one stepping, same voltage, same speed, see the Intel support website for specifics).
1. Observe the safety and ESD precautions at the beginning of this chapter and the additional
cautions given here.
2. Remove the side cover (see your system or chassis documentation for instructions).
3. Raise the locking bar on the socket.
38
Figure 20. Raise the Locking Bar
Intel Server Board SDS2 Product Guide