7 Technical Reference
Server Board Jumpers
Table 6.
Configuration Jumper (CN42)
Jumper Name
CMOS clear
Password Disable
Reserved
Reserved
BIOS Recovery
SPARE
Figure 27. Jumper Locations
Pins
What it does at system reset
1-2
If these pins are jumpered, the CMOS settings will be cleared on the next
reset. These pins should not be jumpered for normal operation.
3-4
If these pins are jumpered, the password will be cleared on the next reset.
These pins should not be jumpered for normal operation.
5-6
Reserved. These pins should not be jumpered for normal operation.
7-8
Reserved. These pins should not be jum pered for normal operation.
9-10
If these pins are jumpered, the BIOS will attempt a recovery boot, loading
BIOS code from a floppy diskette into the Flash device. This is typically
used when the BIOS code has been corrupted. These pins s hould not be
jumpered for normal operation.
11-12
SPARE jumper.
83