User Voice Messaging System Access - Cisco 7925G Administration Manual

User Voice Messaging System Access

User Voice Messaging System Access
Cisco Unified Communications Manager provides the flexibility to integrate with many different voice
messaging systems, including the Cisco Unity voice messaging system. Because you can integrate with many
different systems, you must provide users with detailed information about how to use your specific system.
You should provide this information to each user:
• How to access the voice messaging system account.
• The initial password for accessing the voice messaging system.
• How the phone indicates that messages are waiting.
For information about setting up the MWI method and the interface to the voice messaging system in
Cisco Unified Communications Manager, see the documentation for your system at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
If you are using a Cisco Unity voice messaging system, see the Cisco Unity documentation for your system
for configuring voice messaging and the initial passwords at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/tsd_products_support_series_home.html
See the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for information about
accessing the voice messaging system from the phone.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
234
Make sure that you have configured a default voice messaging system password for all users.
Make sure that you have used Cisco Unified Communications Manager to set up a message waiting
indicator (MWI) method.
Internal Support Website