Remote Monitoring - Cisco 7925G Administration Manual

Remote Monitoring

•
•
•
•
•
•
•
•
Access Web Page for Phone
To access the web page for a Cisco Unified Wireless IP Phone, perform the following steps.
Procedure
Step 1
Obtain the IP address of the Cisco Unified Wireless IP Phone using one of these methods:
• Search for the phone in Cisco Unified Communications Manager by choosing Devices > Phones. Phones
• On the Cisco Unified Wireless IP Phone, press SETTINGS > Device Information > Network and then
Step 2 Open a web browser and enter the following URL:
https://<IP_address>
where IP_address is the IP address of the Cisco Unified Wireless IP Phone
Note
Access Web Page for Phone, page 195
Cisco Unified IP Phone Web Page Information, page 196
Summary Information Area, page 196
Network Setup Information, page 197
Device Information Web Page, page 200
Wireless LAN Statistics Section, page 202
Network Statistics Section, page 204
Stream Statistics Menu, page 206
that are registered with Cisco Unified Communications Manager display the IP address on the Find and
List Phones web page and at the top of the Phone Configuration web page.
scroll to the IP Address option.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
9
C H A P T E R
195