Cisco 7925G Administration Manual page 22

Cisco Unified Wireless IP Phone 7925G and 7926G
The phone is a qualified Bluetooth wireless device (Qualified Device ID [QDID] B014396). The phone
provides voice communication over the same wireless LAN that your computer uses, allowing you to place
and receive phone calls, put calls on hold, transfer calls, make conference calls, and so on.
The following figure shows the Cisco Unified Wireless IP Phone 7925G. The Cisco Unified Wireless IP
Phone 7926G looks similar.
This phone model, like other network devices, must be configured and managed. This phone encodes G.711a,
G.711u, G.729a, G.729ab, and G.722/iLBC codecs, and decodes G.711a, G711b, G.711u, G.729, G729a,
G729b, and G729ab codecs. The phone also supports uncompressed wideband (16 bits, 16 kHz) audio.
The Cisco Unified Wireless IP Phone 7925G and 7926G is hearing aid compatible (HAC) but do not have
any TTY features. They have a centered "dot" or "nib" on the 5 key that is a tactile identifier.
The physical characteristics include:
• Resistance to damage from dropping the phone
• Tolerance of antibacterial and alcohol-based wipes
• Latex- and lead-free
• Resistance against liquid splashes
• Dust resistance
• Shockproof and vibration-proof
• USB 1.1 interface
In addition to basic call-handling features, your phone can provide enhanced productivity features that extend
your call-handling capabilities.
Depending on the configuration, your phone supports:
• Use of Bluetooth wireless headsets, including certain hands-free call features
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
2
Cisco Unified Wireless IP Phone