Static Settings With Disabled Dhcp - Cisco 7925G Administration Manual

DHCP Settings

Static Settings with Disabled DHCP

Table 27: Static Settings when DHCP is Disabled
Static setting
IP Address
Subnet Mask
Default Router 1
Domain Name
DNS Server 1
DNS Server 2
Alternate TFTP server
TFTP Server 1
TFTP Server 2
Set Alternate TFTP Server
If you use DHCP to direct the phones to a TFTP server, you can also assign an alternative TFTP server to
some phones instead of the one assigned by DHCP. To assign an alternate TFTP server to a phone, follow
these steps:
Procedure
Step 1 Choose SETTINGS > Network Profiles.
Step 2 To select the profile name that you want to configure, scroll to the item and press the View button.
Step 3 Enter **# to unlock the profile and press Edit.
Step 4
Select Network Configuration.
Step 5 Scroll to Alternate TFTP and press Yes.
Step 6 Scroll to TFTP Server 1 and press Select.
Step 7 In the New TFTP Server 1 field, enter the IP address for the server.
See Static Settings with Disabled DHCP, on page 122
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
122
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
Description
IP address, the unique identifier assigned by the system administrator for
the phone.
Used to partition the IP address into a network identifier and host identifier
so TCP/IP can distinguish between them.
Identifies the gateway that provides connectivity to the IP network beyond
the subnet to which the phone belongs.
Identifies the Domain Name System (DNS) domain in which the phone
resides.
If the system is configured to use hostnames for servers instead of IP
addresses, identify the primary and secondary DNS server to resolve
hostnames.
Identifies whether you are using an alternate TFTP server. See
TFTP Server, on page 122.
Identifies the TFTP server that the phone uses to obtain configuration files.
Identifies the second TFTP server that the phone can use to obtain
configuration files.
for descriptions of these fields.
Set Alternate