Cisco Unified Wireless IP Phones Setup in Cisco Unified Communications Manager
Cisco Unified Wireless IP Phones Setup in Cisco Unified
Communications Manager
To provide telephony call routing and call-control features for the Cisco Unified Wireless IP Phone 7925G,
7925G-EX, and 7926G, you must use Cisco Unified Communications Manager Administration. For instructions
about adding these devices, see the "Cisco Unified IP Phone Configuration" chapter in the Cisco Unified
Communications Manager Administration Guide.
Telephony Features Available
The following table describes supported telephony features that you can configure using Cisco Unified
Communications Manager Administration for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and
7926G. The table provides references to documentation that contains configuration procedures and feature
information.
For information about using the features on the phone, see Cisco Unified Wireless IP Phone 7925G, 7925G-EX,
and 7926G User Guide for Cisco Unified Communications Manager.
Cisco Unified Communications Manager Administration also provides several service parameters that
Note
you can use to configure various telephony functions. For more information about service parameters and
the functions that they control, you can use the I or ? button on the Cisco Unified Communications Manager
configuration page.
Table 34: Telephony Features for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G
Feature
Description
5 GHz Channel
Enables the wireless phones to use the 5 GHz channel in
Support for Thailand
Thailand.
7926G J2ME
Increases the amount of Java MIDP memory available for the
Memory Increase
Cisco Unified Wireless IP Phone 7926G.
792x USB Driver
Enables USB driver support for Microsoft Windows 7.
Support for
Microsoft Windows
7
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
148
Features, Templates, Services, and Users
Configuration Reference
For more information, see
Radio Frequency
Ranges, on page
25.
No configuration required.
No configuration required.