Log In And Out Of Hunt Groups; Shared Lines; Remote-In-Use Icon; Call Information And Barge - Cisco 7961G User Manual

Shared Lines

Log In and Out of Hunt Groups

Procedure
Step 1
To log into a hunt group, press HLog or Hunt Group. You are now logged into the Hunt Group.
Step 2 To log out of a hunt group, press HLog or Hunt Group. Your phone screen displays the "Logged out of Hunt
Group" message.
Shared Lines
Your system administrator may ask you to use a shared line if you:
• Have multiple phones and want one phone number
• Share call-handling tasks with coworkers
• Handle calls on behalf of a manager

Remote-In-Use Icon

The remote-in-use icon
place and receive calls as usual on the shared line, even when the remote-in-use icon appears.

Call Information and Barge

Phones that share a line each display information about calls that are placed and received on the shared line.
This information may include caller ID and call duration. See the
When call information is visible in this way, you and coworkers who share a line can add yourselves to calls
using either Barge or cBarge. See

Privacy

If you do not want coworkers who share your line to see information about your calls, enable the Privacy
feature. Doing so also prevents coworkers from barging your calls. See
50.
The maximum number of calls that a shared line supports can vary by phone.
Note
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
48
appears when another phone that shares your line has a connected call. You can
Barge, cBarge, and Shared-line Calls, on page
Calling Features
Privacy, on page 48 section for exceptions.
49.
Privacy and Shared Lines, on page