Connecting To Visible Home Wi-Fi Access Point; Connecting To Hidden Home Wi-Fi Access Point - Lennox iComfort M30 Installation And Setup Manual

3. If Wi-Fi is set to disabled, touch the > icon to
enabled. The Wi-Fi screen will appear where
you can toggle it to ON.
C v
onneCting to isiBle
1. Touch Wi-Fi network. This will display a list
of visible Wi-Fi networks within range of the
thermostat.
2. Select the homeowner network and type in the
password. Touch join to continue.
NOTE: The thermostat can connect to a home
wireless router that uses up to 32 characters
in the access point name (visible or hidden).
NOTE: If you wish to see the characters you
are typing, check show password. The
thermostat will support up to a 63 character
password. The password cannot contain the
% or # symbols.
3. If joining the network was successful, the access
point name will appear next to Wi-Fi networks.
H W -f a P
ome i i CCess
C
onneCting to
1. Touch Wi-Fi network. Scroll down to others.
2. Enter new network information. You will need
the name of the access point and the type of
security being used. Select Security. Options
are: none, WEP, WPA and WPA2. If your home
Wi-Fi connection is unsecured, then Wi-FI
security must be enabled using WEP, WPA or
WPA2 via the router before proceeding. Consult
your router documentation on how to enable Wi-
Fi security.
3. Enter the password.
4. Touch join to complete.
5. If joining the hidden network was successful,
oint
the access point name will appear next to wi-fi
networks.
Whether connecting to a visible or hidden network,
if successful, a check mark will appear above both
the router and Internet icons.
M30
THERMOSTAT
28
H H W -f a
iDDen ome i i CCess
HOME WI-FI INTERNET
ACCESS
ROUTER
P
oint
SERVER
CONNECTION