Settings; Wi-Fi; Access Point Is Visible; Access Point Is Hidden - Lennox iComfort E30 User Manual

Settings

The setting screen will allow the homeowner to connect to their home Wi-Fi router
and give their system a name. See list of settings for options.
Figure 6. User Setting Menu

Wi-Fi

This is for connecting the thermostat to a secure home wireless network.
NOTE: A router with Bonjour capabilities is required for this function. Check
the router functions if Smart Hubs do not connect. Apple Bonjour
implementation of zero-configuration networking (Zeroconf), a group of
technologies that includes service discovery, address assignment, and
host name resolution.
NOTE: Never use a home guest account. Never use an open router connection
(non-secure). Always use a secure connection physically located in the
home where the thermostat is located.
System
settings
wi−fi local
wi−fi local
name upstairs
away
on
Feels Like
on
fan
auto
heat & cool
humidity
notifications
advanced settings
general
display
home info
account
HomeKit

Access Point is Visible

1. Slide the option to ON to enable Wi-Fi.
2. Wi-Fi network will show not connected. Press on not connected.
3. Select a network will be displayed listing all detected networks within range.
Select your home network by pressing on the network name.
NOTE: The thermostat can connect to a home wireless router that uses up to 32
characters in the access point name (visible or hidden).
4. When connecting to a secure home Wi-Fi network, a password will be requested.
Enter your home Wi-Fi network password and press join to continue.
NOTE: If you wish to see the characters you are typing, check show password.
The thermostat will support up to a 63 character password.

Access Point is Hidden

1. Slide the option to ON to enable Wi-Fi.
2. Wi-Fi network will show not connected. Press on not connected.
3. Select other.
4. The "enter new network information" screen will appear. Enter the name of the
hidden network.
NOTE: The thermostat can connect to a home wireless outer that uses up to 32
characters in the access point name (visible or hidden).
5. Select Security. Options are: none, WEP, WPA and WPA2. If your home Wi-Fi
connection is unsecured, then Wi-FI security must be enabled using WEP, WPA
or WPA2 via the router before proceeding. Consult your router documentation
on how to enable Wi-Fi security.
6. Once security type is selected, a password field will appear. Enter the password
to access your home Wi-Fi network.
NOTE: If you wish to see the characters you are typing, check show password.
The thermostat will support up to a 63 character password.
7. Press join.
Whether connecting to a visible or hidden network, if successful, a check mark will
appear above both the router and Internet icons.
is an
®
8
Figure 7. Connection Status