Wi-Fi Connection - Lennox iComfort M30 Installation And Setup Manual

Wi-Fi Connection

Wireless networks supported by this system are:
• 802.11b is 2.4Ghz band (max 11 Mbit/s)
• 802.11g is 2.4Ghz band (max 54 Mbit/s)
• 802.11n is 2.4Ghz band (max 130 Mbit/s)
This is for connecting the thermostat to a secure
home wireless network.
NOTE: A router with Bonjour capabilities is required
for this function. Check the router functions
if the thermostat does not connect. Apple
Bonjour is an implementation of zero-
®
configuration
group of technologies that includes service
discovery, address assignment, and host
name resolution.
NOTE: Never use a home guest account and
never use an open router connection (non-
secure).
NOTE: Always use a secure connection physically
located in the home where the thermostat
is located.
NOTE: If thermostat will not connect to the home
router, then try using a hot spot to check
thermostat Wi-Fi connectivity. A Wi-Fi
extender may be required or move the
router closer to thermostat for connection.
1. Touch the Menu icon in the upper right-hand
corner of the display.
networking (Zeroconf),
2. Touch the settings option on the menu.
a
27