Connecting To Home Wi-Fi Router - Lennox 11U61 Setup And Installation Manual

Connecting to a Home Wi-Fi Router
Check the router utility program or contact service
provider for help. When determining the location for the
Wi-Fi thermostat, be sure it is in an area near enough to
the home Wi-Fi router to ensure good communications
signal strength between the thermostat and the Wi-Fi
router. (Hint: Use a smart phone with Wi-Fi and Wi-Fi
finder application to locate and determine optimal
location based on router Wi-Fi signal strength.)
NOTE - Thermostat will not be able to reliably connect to
a router if the received signal strength indicator (RSSI) is
-70 or greater.
NOTE - Correct the cause of any alerts prior to
continuing set up. Secure Connection Recommended!
Verify the home Wi-Fi router supports at least one of the
supports wireless bands (802.11b, g or n). Check router
utility program or contact service provider for assistance.
ENABLING WI-FI
To enable the Wi-Fi feature to communicate with a
wireless router
1. Press and release Wi-Fi in the lower left corner of
the HOME screen
507428-01
indoor temperature
indoor humidity is 41%
system is cooling
Wi-Fi
Wi-Fi
9:39 am Aug 15, 2012
1
Figure 4. Press Wi-FI
2. Press the Wi-Fi disable button to enable Wi-Fi.
WI-FIL SETTINGS
Figure 5. Enable Wi-FI
6
set temp
75
heat
or
cool
cool-to
72
fan is
AUTO fan is fan is
Heat-to
AUTO OFF
Thermostat is not connected to the Wi-FI network
WI-FI
disabled
Press to enable /
disable Wi-FI
outdoor
temperature
enter
80
away
?
X