Communication Settings Of Plc Using Fpwin Gr7 - Panasonic GT703 User Manual

Connection with PLC

4.5.3 Communication Settings of PLC using FPWIN GR7

Please read below to make PLC communication settings using the FPWIN GR.
(1) Select "PLC system register setting" from the Option menu (O).
(2) Make the communication settings.
Select "Tool Port" setting when connecting to the tool port or "COM Port" setting when
connecting to the COM port. Please match the communication format (or transmission format)
and baud rate settings to those of the GT.
In addition to the transfer format and baud rate settings, set the communication mode to
"Computer Link" when using the COM port.
Note) The baud rate can be changed from 9600 bps.
When changing it, it is necessary to make the both baud rates of FP series and GT series
be the same.
4-34
<Default>
- Operation mode: Computer
link
- Baud rate: 9600bps
- Character bit: 8 bits
- Parity check: Odd
: Stop Bit: 1