Connection With Other Companies' Plcs; Connection With Serial Devices; Precautions Concerning The Power Supply Of 5 V Dc Type - Panasonic GT703 User Manual

Connection with PLC

4.1.3 Connection with Other Companies' PLCs

For information on the connection with other companies' PLCs, see the latest GTWIN HELP
or our website (http://industrial.panasonic.com/ac/e/dl_center/manual) where you can get the
manual.
REFERENCE
<GT series Connection with other companies' PLCs ARCT1F449E>

4.1.4 Connection with Serial Devices

Devices other than PLCs can be connected by using the general-purpose serial
communication mode of the GT. Also, PLCs made by other companies which are not put on
our website can be used. See our website or the GT series General-purpose serial
communication manual.
REFERENCE
<GT series General-purpose Serial Communication Manual ARCT1F356E>

4.1.5 Precautions concerning the Power Supply of 5 V DC type

As for the 5 V DC type GT703, the power cannot be supplied from the tool port of a PLC (CPU
unit). Prepare an external power supply separately.
4-4