Table of Contents
Advertisement
Specifications
6.1 GT703 Specifications
6.1.1 General Specifications
Item
Rated voltage
Operating voltage
range
Power consumption
Operating ambient
temperature
Operating ambient
humidity
Storage ambient
temperature
Storage ambient
humidity
Breakdown voltage
Insulation resistance
Vibration resistance
Shock resistance
EU Directive
applicable standard
Noise resistance
Electrostatic
discharge resistance
Protective
construction
Weight (main unit)
(Note 1): The power cannot be supplied from the tool port of a PLC (CPU unit).
(Note 2): When using our exclusive cable.
(Note 3): When installing the unit again, replace the water-proof packing.
6-2
Specifications
24 V DC type
24 V DC
21.6 to 26.4 V DC
2.4 W or less (100 mA or less).
0 to +50 °C
20 to 85% RH (at 25?), non-condensing
-20 to +60 °C
10 to 85% RH (at 25 °C), non-condensing
Between [power supply terminals] and [case]
500 V AC for 1 minute, Cutoff current: 10 mA (at default setting)
Between [power supply terminals] and [case]
100 MΩ or more, 500 V DC, measured with megohmmeter (at default setting)
Conforms to IEC61131-2.
5 to 8.4 Hz, 3.5-mm single amplitude
8.4 to 150 Hz, Acceleration 9.8 m/s
10 sweeps each in X, Y and Z directions (1 octave/min)
Conforms to JISB3502 and IEC61131-2.
2
147m/s
or more, 3 times in the X, Y, Z directions
EN61131-2 (EMC Directive)
1,000 V [P-P], Pulse width 50 ns, 1 µs between power supply terminals (based on in-
house measurements) (Note 2)
4 kV (Contact discharge)
IP67 (Initial value, evaluated by us)
Dustproof and waterproof from front panel only (packing used on panel contact surface)
(Note 3)
Approx. 180 g
5V DC type
5 V DC
4.5 to 5.5 V DC
2W or less (400 mA or less). (Note 1)
2
Advertisement
Table of Contents
