Names And Functions Of Parts; Gt703 - Panasonic GT703 User Manual

Names and Functions of Parts

2.1 Names and Functions of Parts

2.1.1 GT703

 GT703M / GT703G
 Names and Functions of Parts
Num
Name
ber
①
Touch screen
②
Attachment fittings
COM port (PLC/external
③
device connection port)
and power supply terminal
④
USB port
Mounting position of
⑤
connector for battery
⑥
SD memory card slot
⑦
Ethernet port
⑧
Waterproof packing
⑨
Battery cover
Mounting position of
⑩
battery
Operation mode setting
⑪
switches
2-2
Functions
Various screens are displayed here. Switches can be operated and data entered
simply by touching the touch screen. A sheet is affixed to the touch panel to
protect it from scratches when shipping. Remove it before using the GT.
Secure the unit to the installation panel at four points using the fittings and
screws provided with the unit.
This is a communication port (RS232C or RS422) for connecting to a PLC, host
PC, or microcomputer board, and a power supply terminal for operation.
Connector for the connection between the unit and a PC when using the screen
creation tool software GTWIN. A commercial USB cable is used.
The connector for battery is mounted.
An SD memory card is inserted. SD memory cards can be used for copying
screen data and our PLC programs, and used for the logging function, alarm
history function and SD recipe function.
An external device is connected for controlling GT using Ethernet. Also, this port
is used for connecting to a PC when using the screen creation tool software
GTWIN. Use a commercial LAN cable.
This assures that the front panel is waterproof.
When using a battery for GT clock (AFPX-BATT) separately purchased, open
this battery cover to install it.
This is a space for mounting a battery.
Switches for setting the operation mode at the time of power-on. Using these
switches enables to inhibit to move to the system menu or select the memory
clear display.