Table of Contents
Advertisement
3.1.2 Mounting Direction
The GT703/GT704 can be used in a vertical orientation and installed in a horizontal
orientation. There is no difference in the operating ambient temperature due to the mounting
orientation.
GT
Conditions
Horizontally installed
GT703 / GT704
Vertically used
Horizontally installed
3.1.3 Installation Space
Applicable panel thickness
A panel with a thickness of 1.0 to 5.0 mm should be used. Use a panel that is strong enough
not to be warped.
Clearance when the GT is installed
When installing the GT unit, if other parts are being installed to the panel or cables are being
wired to it, we recommend providing a clearance around the GT unit. This prevents cables
from being damaged, and facilitates the installation work. Also, make sure that the slits in the
main unit are never obstructed.
Model name
Clearance
30 mm or more (50 mm or more
GT703 / GT704
recommended)
3.1.4 Mounting Screws
The GT703/GT704 dedicated screw is not sold on the open market.
Using screws other than the dedicated screw will cause failures such as decrease of water-
proof property.
Item name
Attachment fitting (with dedicated screws)
Ambient temperature
0 to 50 °C
Vertically used
Clearance on the surface
to connect the screen
transfer cable
60 mm
Description
5 sets (Maintenance parts)
3.1 Installation
Clearance on the
mounting surface when
using an SD memory card
40 mm
Product number
AIG12830
3-3
Advertisement
Table of Contents
