Panasonic GT703 User Manual page 9

Programmable display
Hide thumbs Also See for GT703:
Table of Contents

Advertisement

 Touch switches
• Always operate the touch switches with fingers. As the touch switches may be damaged
due to the excessive load or shock (caused when being operated with any tools), the touch
switches should be operated within the specified control force. Also, if the touch switches
are pressed like kneading, the electrode may be worn out exceptionally, and cause the
malfunction. Operate with a single touch of a switch.
• The touch position may shift due to aging variation. If the touch position has shifted, please
adjust it.
 LCD panel
• Do not drop or have a strong impact on the programmable display unit as glass is used for
the LCD panel.
• The liquid in the LCD panel is a hazardous substance. If the LCD panel is broken, do not
put the leaked crystalline liquid into your mouse. Should it get into your mouse, immediately
gargle, and consult a doctor. If it adheres to your skin or clothes, wash it away with soap.
• On the LCD panel, bright spots ( points always lit) or black spots (points always unlit) may
appear, or the uneven brightness, flickers or crosstalk (appearance of unintended shades in
the area no graphic or part is arranged) may occur depending on the operating conditions.
Note that these phenomena are resulted from the basic characteristics of LCD panel not
defects or failures of the product.
 Battery
Do not leave the battery in the unit when it is not used. There is a possibility of leak if it is left
being discharged.
 Scratch protection sheet
A sheet is affixed to the touch panel to protect it from scratches when shipping. Please
remove it before using the GT.
 SD memory card
• The data saved in the SD memory card may be lost in the following cases. We assume no
responsibility whatsoever for the lost of saved data.
When a user or third party used the SD memory card incorrectly.
When the SD memory card was affected by any static electricity or electrical noise.
When the SD memory card was removed or the power supply of the GT unit was turned off
while data was being read, written or deleted to/from the SD memory card.
• It is recommended to save important data in another media for backup.
Before You Start
vii

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gt704Gt seriesGt704mGt703m

Table of Contents