Required Tools And Materials - Furuno DRS6A X-Class Installation Manual

1.3

Required Tools and Materials

The following tools should be prepared in advance for this installation.
No.
1 Electrical drill
2 Phillips-head screw driver
3 Wrench
4 Hex. L-wrench
5 Self-vulcanizing tape
6 Vinyl tape*
7 Cable tie
8 Ground wire
*: For cosmetic purposes, black color vinyl tape (cable color) is recommended.
1
2
3
4
Name
For making the mounting holes, drill bit:  15 mm
#3, for securing the cable cover
For M8 (Hex. size 13 mm) and M12 (Hex. size 19 mm)
For fastening the stud bolts (Hex. size 6 mm)
For waterproofing the junction of connectors
For securing the cables
IV-2sq
1. INSTALLATION AND WIRING
5
6
7
8
Remarks