Furuno DRS6A X-Class Installation Manual page 42

4. Apply silicone rubber to the thread holes on the bottom of the radiator (4 loca-
tions).
5. Prepare four bolt assemblies; pass the spring washer (M8) and flat washer (M8)
through the each hex bolt (M8 30) then apply silicone rubber.
Flat washer
Spring washer
Hex. bolt
6. Fasten the radiator to the radiator bracket, using four bolt assemblies prepared at
step 5.
Note: Be sure to align the waveguide location between the radiator and radiator
bracket before fastening bolt assemblies.
Hex. bolt
(4 pcs)
Bottom view: Radiator
Detailed view (after securing the radiator)
1. INSTALLATION AND WIRING
Silicone rubber
Silicone rubber
Align the waveguide
location.