Table of Contents
Advertisement
2.
CONTROLS & CONNECTORS
2.1.
TOP PANEL
(1) Antenna jack (BNC 50Ω)
Connect the supplied flexible antenna or an
external antenna.
(2) Antenna ring
Covers the gap between the antenna and the
jack. Remains on the jack when the antenna is
removed.
(3) VOLUME (inner) knob
Turn this (inner) control clockwise to increase
the volume and counterclockwise to decrease
the volume.
(4) DIAL selector (outer) knob
Tunes the frequency up or down and selects
menu items.
2.2.
FRONT PANEL
(5) LCD (liquid crystal display)
Shows selected operation conditions, as
described in chapter 2.7 "LCD DSPLAY"
(6) Cursor keys and [ENT] key
[◀] and [▶] are used to change the frequency
or select an item displayed on the LCD.
Press the [ENT] key to determine the
selection or entered values. [ENT] can also
switch VFOs. Press and hold to display the
memory channel registration menu.
(7) [MENU] key
Displays the MENU-TOP screen.
(8) [MODE] key
Displays the receive modes menu.
(9) [ ● ] REC key
Starts/stops audio recording on SD card.
(10) [CLR] key
Cancels the current operation or goes to
parent menu.
(11) [
] key lock
Press and hold to enable/disable the lock
feature. When enabled, all controls except
VOL and PWR will be disabled.
(12) Numeric keypad
The keypad is used when setting frequencies, bank & channel numbers, or for an entry
selection in a menu.
(13) Loudspeaker
(5)
(6)
(7)
(8)
(12)
(13)
7
(1) (2)
(3)
(4)
(9)
(10)
(11)
Hide quick links:
Advertisement
Table of Contents
