Low Battery; Watch Alarm - Raymarine ST5000+ Owner's Handbook Manual

Chapter 3: Advanced Operation
• Waypoint advance is requested by pressing track for 1 second in
• When the Man Overboard (MOB) function is activated in Track
When the alarm sounds, the pilot continues on its current heading, but
displays the bearing to the next waypoint and the direction in which the
boat will turn to take up that bearing.
Check that it is safe to turn onto the new track, and press track to
accept the waypoint advance.
Alternatively, to cancel the alarm without accepting the waypoint
advance, press standby to return to hand steering, or auto to return to
Auto mode.
Note: The waypoint advance will only operate on pilots receiving
valid bearing to waypoint and waypoint number information.

Low battery

LOW BATT
The Low Battery alarm sounds when the supply voltage drops below
10 V (±0.5 V).
Press STANDBY to clear the alarm and return to hand steering.
Start the engine to recharge the battery.

Watch alarm

WATCH
The Watch alarm is activated in Watch mode when the timer reaches 4
minutes. It is not available from Standby mode.
If you wish to set the Watch mode, the WATCH screen must be
configured as one of the Data Pages for display, as described in
section 4.1.
To set and control the Watch alarm:
1. Select Auto, Track or Vane mode.
2. Press the disp key until the WATCH Data Page is displayed.
Track mode (SeaTalk Navigators only).
mode.
21