42
Cable connectors
• All connections, except for the SeaTalk cables, are made via spade
• When fitting the spade connectors, make sure the connector fits
Power supply connection
• The control head requires its own dedicated power supply. It cannot
• The ST5000 Plus is supplied with a 2 m (6.5 ft) power lead
• A circuit breaker or fuse (12 A for sterndrives and 20 A for
ST5000 Plus Sterndrive & Hydraulic Autopilots Owner's Handbook
connectors.
securely over the blade and not between the connector and its
plastic insulating boot – incorrect fitting will give intermittent
contact which will lead to faulty autopilot operation.
source power from SeaTalk, and must supply the power to the rest
of the SeaTalk system.
terminated with 1/4 in (6 mm) spade connectors.
hydraulics) must be fitted to the +12 V supply.
Power Cable
Blue (-)
Brown (+)
Fuse
or circuit
breaker
D3287-1