Adapting The Service Interval Display When Replacing The Dash Panel Insert (Qg1 And Qg2) - Skoda FABIA 2000 Workshop Manual

FABIA 2000 Electrical System
♦
Channel 10: 15000 km - 6000 km = 9000 km (adjust-
ment value 90)
♦
Channel 11: 30000 km - 6000 km = 24000 km (adjust-
ment value 240)
♦
Channel 12: 360 days - 160 days = 200 days (adjust-
ment value 200)
Note
The time counter for the INSP service can be adjusted by
a maximum of 360 days.
Readout on display:
–
Confirm with .
Q
Readout on display:
–
Confirm with .
Q
Readout on display:
–
Press .
Readout on display:
Adapting the service interval display
when replacing the dash panel insert
(QG1 and QG2)
If the dash panel insert is replaced, the current service in-
terval data must be entered into the new dash panel in-
sert.
Note
♦
If the original values are not entered the service inter-
vals will again be set back to zero and the service
message will be delayed.
♦
The adjustment channels 42, 43, 44, 45, 49 will be au-
tomatically adjusted once the dash panel insert has
been coded.
♦
Adjustment channel 39 will be automatically set to 1 -
ON.
An adjustment table for the service intervals
adjustment For vehi-
channel
39 QG0, QG1
and QG2
40 QG1 and
41 QG1 and
42 QG1 and
Edition 05.04
S00.5304.11.20
cles
An analysis of the oil level
♦
1 - on
♦
0 - off
The number of km driven since the last inspection service (in km hundreds)
QG2
The number of days since the last inspection service
QG2
The minimum distance which limits the service interval (in hundreds of kilome-
QG2 tres)
Self-diagnosis of the dash panel insert III
Channel 10 adjustment
actual value OIL in 100 km
Channel 10 adjustment
Store changed value?
Channel 10 Adjustment
Changed value stored
Vehicle system test
Select function XX
Counter contents
90
90 Q
- -
100 Q
100 ->
HELP
90-4
11
page