Coding The Vehicle Voltage Control Unit - Skoda FABIA 2000 Workshop Manual

90
Readout on display:
The relay must click.
–
Press .
Readout on display:
The interior lighting is on (interior lighting switch on „door
control").
–
Press .
Readout on display:
The tailgate opens.
–
Press .
Readout on display:
The headlamp cleaning system is operated for a short
time.
–
Press .
Ignore read-out.
–
Press .
Readout on display:
The mirror heater is switched on.
–
Press .
Readout on display:
Ignore read-out.
–
Press .
Readout on display:
–
Press .
Readout on display:

Coding the vehicle voltage control unit

–
Connect vehicle system tester -V.A.G 1552- and se-
lect „Vehicle voltage control unit" (address word 09);
ignition is switched on for this step ⇒ Chapter 90-5.
Readout on display:
–
Select function
0 7
firm with .
Q
Readout on display:
–
Enter code number by referring to table of codes and
confirm with .
Q
Table of codes
Complete with the individual values according to equip-
ment.
90-6
8
page
„code the control unit" and con-
Self-diagnosis of the vehicle voltage control unit II
FABIA 2000
Actuator diagnosis
Voltage supply relay tml.30-J317
Actuator diagnosis
Interior lighting
Actuator diagnosis
Actuation of tailgate remote unlocking
Actuator diagnosis
HCS relay -J39
Actuator diagnosis
Consumer cut-off
Actuator diagnosis
Heated exterior mirrors (Z4/Z5)
Actuator diagnosis
Warning lamp for heated ext. mirrors -K153
Actuator diagnosis
END
Vehicle system test
Select function XX
Vehicle system test
Select function XX
Coding control unit
Enter code number XXXXX (0-32000)
Electrical System
->
->
->
->
->
->
->
->
HELP
HELP
Edition 05.04
S00.5304.11.20