Table of Contents
Advertisement
›
Store the speed limit by confirming the set value, or wait several seconds.
Your settings will be saved automatically.
This allows you to set the speed in 5 km/h intervals.
Adjusting the speed limit while the vehicle is moving
›
Select the menu item Warning at ( ) or ( ).
›
Drive at the desired speed, e.g. 50 km/h.
›
Confirm the current speed as the speed limit.
If you wish to adjust the set speed limit, you can do so in 5 km/h intervals (e.g.
the accepted speed of 47 km/h increases to 50 km/h or decreases to 45 km/h).
›
+Store the speed limit, or wait several seconds; your settings will be saved
automatically.
Change or disable speed limit
›
Select the menu item Warning at ( ) or ( ).
›
By confirming the stored value, the speed limit is disabled.
›
By reconfirming, the option to change the speed limit is activated.
The speed limit set mode is stored even after the ignition is switched off and
on. After a gap between driving exceeding 2 hours, the pre-set speed limit is
deactivated.
Service interval display
Introduction
This chapter contains information on the following subjects:
Displaying the distance and days until the next service interval
Service messages
Resetting the service interval display
The service interval display shows the time and mileage to the next service
event.
The information regarding the service intervals can be found in the service
schedule.
Note
Information is retained in the Service Interval Display even after the vehicle
battery is disconnected.
48
Operation
All manuals and user guides at all-guides.com
Displaying the distance and days until the next service interval
There is always the option to display the remaining days and miles until the
next service date in the display.
›
Switch on the ignition.
›
Press the button
down until the menu item Service appears in the display.
›
Release the button
The icon appears in the display, as well as the following message for exam-
ple.
›
Press the button
Service messages
Messages before reaching the scheduled service date
Before the next service date has been reached, the symbol as well as a mes-
sage about the mileage or days until the next service event appears in the dis-
play after switching on the ignition.
This indicator decreases in steps of 100 km or in days.
Messages upon reaching scheduled service date
Once the service interval is reached, the icon appears in the display after the
ignition is switched on, as well as the following message, for example.
48
48
or
49
or
» Fig. 20
on page 30 or
5
.
5
Oil change in ... km or Oil change in ... days
OIL CHANGE IN ... DAYS or OIL CHANGE IN ...
and the system switches to the home setting.
5
Oil change now!
OIL CHANGE NOW
Inspection now!
INSPECTION NOW
Oil change and inspection now!
OIL CHAN_ AND INSPECTION NOW
» Fig. 21
on page 30 and hold
Advertisement
Chapters
Table of Contents
