Smart Card Codes On The Printer Label - DataCard CE870 Installation And Administrator's Manual

Smart Card Codes on the Printer Label

The configuration label includes codes that identify the type and model of the smart card module
installed in the printer. The following table lists the codes used on the configuration label.
Code on Label
S1
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
S13
The S1 value on the configuration label indicates that the printer has the basic smart card
components installed. Basic components include the mounting hardware only. An integrator
must install a contactless reader.
If the Sx value is included in the configuration code, the printer has the basic components of an
S1, plus the appropriate interface installed.
The smart card readers available may vary by printer model. Contact your authorized
dealer for more information.
58
Type of Smart Card Module
Integrator Contactless
HID pcProx Contactless
iCLASS Read Contactless
iCLASS Read/Write Contactless
DUALi Standard
DUALi Single Wire
DUALi Single Wire Sony Felica
GEMPC USB / pcProx Dual
Contact Station
Identive Dual Interface Reader
pcProx Plus Dual Frequency
DUALi Single Wire Large Memory
Elements of Card Design