Igmp Snooping Configuration Task List - Planet Networking & Communication WGSW-50040 Configuration Manual

21.3.2 IGMP Snooping Configuration Task List

1. Enable IGMP Snooping
2. Configure IGMP Snooping
1. Enable IGMP Snooping
Global Mode
ip igmp snooping
no ip igmp snooping
2. Configure IGMP Snooping
Global Mode
ip igmp snooping vlan <vlan-id>
no ip igmp snooping vlan <vlan-id>
ip igmp snooping vlan < vlan-id > limit
{group <g_limit> | source <s_limit>}
no ip igmp snooping vlan < vlan-id > limit
ip igmp snooping vlan <vlan-id>
l2-general-querier
no ip igmp snooping vlan <vlan-id>
l2-general-querier
ip igmp snooping vlan <vlan-id>
l2-general-querier-version <version>
ip igmp snooping vlan <vlan-id>
l2-general-querier-source <source>
ip igmp snooping vlan <vlan-id>
mrouter-port interface <interface –name>
no ip igmp snooping vlan <vlan-id>
mrouter-port interface <interface –name>
ip igmp snooping vlan <vlan-id> mrpt
<value >
no ip igmp snooping vlan <vlan-id> mrpt
ip igmp snooping vlan <vlan-id>
Command
Command
Explanation
Enables IGMP Snooping. The no operation
disables IGMP Snooping function.
Explanation
Enables IGMP Snooping for specified VLAN.
The no operation disables IGMP Snooping for
specified VLAN.
Configure the max group count of vlan and
the max source count of every group. The "no
ip igmp snooping vlan <vlan-id> limit"
command cancels this configuration.
Set this vlan to layer 2 general querier. It is
recommended to configure a layer 2 general
querier on a segment. The "no ip igmp
snooping
l2-general-querier"command
configuration.
Configure the version number of a general
query from a layer 2 general querier.
Configure the source address of a general
query from a layer 2 general querier.
Configure static mrouter port of vlan. The no
form of the
configuration.
Configure this survive time of mrouter port.
The "no ip igmp snooping vlan <vlan-id>
mrpt" command restores the default value.
Configure this query interval. The "no ip igmp
21-19
vlan <vlan-id>
cancels
command cancels
this
this