Pitney Bowes DA50S Service Manual page 97

Printer Control Panel Menus and Utilities • Appendix A
A.4 LCD Setup
Menu
DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual
9. Env Auto Eject
Submenu Option Settings
Off, On
A. Auto Eject
Mode
0.0 to 30.0
B. Mode
seconds
(in 0.1 second
increments)
10. ROM Revision Number
Menu Option Settings
ROM REV. =
ROM Revision #
xx.xx.xx
MAIN COUNT
= xxxxxx
What It Does
Allows you to set the printer to automatically
eject the last envelope of the job. When this
option is On, the printer ejects a blank enve-
lope between batch jobs.
Allows you to set the amount of delay be-
tween the ejection of the blank envelope (if
Auto Eject mode is On) and the start of next
batch job.
What It Does
Allows you to verify the firmware revision
installed in the printer (e.g., for CASS certi-
fication). It is also useful to determine if the
printer requires an upgrade.
The maintenance count, which is the total
number of print cycles accumulated, also
displays. This count is helpful in determining
solutions to printer problems.
NOTE: If the TEST button is pressed, all the
menu settings are printed on as many #10
envelopes as required, using 12 point Cou-
rier and in the current language.
A-15