User Access - Agilent Technologies 850-DS Operator's Manual

4 Operating the 850-DS

User Access

Press User Access from the Main screen to assign the system access level,
modify functionality of the User Levels and, if enabled, regulate individual user
access. The 850-DS firmware supports a system-based level of control or access
to specific functions based on individual users. This distinction is governed by
the Username/Password Access feature (see User Access screen on
If the Username/Password Access feature is enabled, individual users are
assigned a Name, Password, and User Level and must log in to access the
850-DS firmware. Specific functionality is based on their User Level which is
defined by an Administrator of the system.
If the Username/Password Access feature is disabled, an Administrator may
toggle between the three available access levels available on the 850-DS. The
current access level is indicated by a green circle. Any user may change the
access level to a lower setting (e.g., Advanced User to User) without entering a
password. Any changes to a higher level (e.g., Advanced User to Administrator)
require a password.
80
page 81).
850-DS Operator's Manual