Startup Screen - Agilent Technologies 850-DS Operator's Manual

4 Operating the 850-DS

Startup Screen

Figure 4.
The Startup screen provides initial information after you power on the
instrument. The firmware version, LCD version, serial number and release date
are displayed while a self-test is executed in the background. If the self-test
completes successfully, a green check mark will be displayed for a few seconds
and then the instrument will progress to the Main screen. If an error is
encountered during the self-test, a red X will be displayed along with a short text
description of the component causing the error. After approximately 10 seconds,
the Startup screen will change over to the Main screen.
30
Startup Screen
850-DS Operator's Manual