Synchronized Start - Agilent Technologies 850-DS Operator's Manual

3 Setting Up the 850-DS

Synchronized Start

To utilize the Synchronized Start feature of the 850-DS, connect a 9-9 pin null
modem cable (5075-0449) from the AUX RS-232 port of one 850-DS to another
850-DS. The desired method may be initiated on both units by pressing
Synchronized Start on the Start Options screen on one of the 850-DS units. The
identical method to be executed must be loaded in the same method slot of each
sampling station.
Figure 2.
850-DS Operator's Manual
Start Options
23