Optional Filter Module - Agilent Technologies 850-DS Operator's Manual

3 Setting Up the 850-DS

Optional Filter Module

NOTE
Figure 3.
The Agilent 850-DS Dissolution Sampling Station can be optionally equipped with
a filtering option that greatly improves dissolution sample processing through
the use of specifically designed filter plates. The plates are consistent with
filtration membranes and housing materials currently used for dissolution
sampling. They are manufactured and sold by GE-Whatman specifically for use
with the Agilent 850-DS. Each plate contains eight 25 mm disks incorporated on
a flat cartridge. The compact arrangement of the filter disks on the plate also
make it much easier for the automated equipment to process and filter samples
over traditional automation-ready filters.
The Filter Module, when installed, may be easily disabled if not required for all
dissolution methods. Media replacement may also be used with the Filter Module
installed. Contact Agilent for assistance with filter validation or visit
www.gelifesciences.com for complete filter plate availability and ordering.
850-DS Operator's Manual
The 850-DS Filter Module should only be installed by a certified
Agilent representative.
Filter Module and Filter Plates
27